用于沼氣中硫化氫的置換,脫硫效率可以達到99%,是生物氣體生產過程中起到優化純化生物氣體,提高熱直效率。如氣體純度要求更高可使用雙塔。鋼制或玻璃。
For the replacement of hydrogen sulfide in biogas, the desulfurization efficiency can reach 99%, which can optimize the purification of biological gas and improve the thermal efficiency during the production of biological gas. If the gas purity requirement is higher, double towers can be used. Steel or glass.
沼氣脫硫是基于沼氣中的硫化氫對環境、設備、管道以及儀表等產生污染和腐蝕的影響,故無論是直接用于燃燒或沼氣發電,都必須對沼氣進行必要的脫硫、脫碳、脫水、除塵等處理。
Biogas desulfurization is based on the impact of hydrogen sulfide in biogas on the environment, equipment, pipelines, instruments, etc., resulting in pollution and corrosion. Therefore, whether directly used for combustion or biogas power generation, biogas must be treated with necessary desulfurization, decarburization, dehydration, dust removal, etc.
根據投料的成分不同,產生的沼氣中H2S含量略有差異,一般濃度為1~12g/m3,蛋白質或硫鹽含量高的原料,發本地時沼氣中H2S的含量就較高。根據城市燃?xì)鈽?biāo)準,液化石油氣中H2S含量不得超過20mg/m3。
According to the composition of the feed, the H2S content in the biogas produced is slightly different, and the general concentration is 1~12g/m3. For raw materials with high protein or sulfur salt content, the H2S content in the biogas will be higher when it is delivered locally. According to the urban gas standard, the H2S content in LPG shall not exceed 20mg/m3.
對厭氧消化產生的沼氣進行脫硫,一般采用直接脫硫方法,按原理可分為干法、濕法和生物脫硫法。生物脫硫法是近年來出現的代替化學脫硫法的新型脫硫方式,在很多方面可以克服化學脫硫的不足。
The direct desulfurization method is generally adopted for the desulfurization of biogas produced by anaerobic digestion, which can be divided into dry method, wet method and biological desulfurization according to the principle. Biological desulfurization is a new type of desulfurization method that has emerged in recent years to replace chemical desulfurization, and it can overcome the shortcomings of chemical desulfurization in many aspects.
產品特點:
Product features:
1、 技術成熟,運行可靠性高。
1. The technology is mature and the operation reliability is high.
2、 操作彈性大,對煤種變化的適應性強。脫硫塔工藝吸收效果好,吸收劑利用率高,可根據鍋爐煤種變化,適當調節PH值、液氣比等因子,以保證沒計脫硫率的實現。
2. The operation flexibility is large, and the adaptability to the change of coal type is strong. Desulfurization tower process has good absorption effect and high utilization rate of absorbent. PH value, liquid gas ratio and other factors can be appropriately adjusted according to the change of boiler coal type to ensure that the desulfurization rate is not calculated.
3、 鈉堿循環利用,損耗少,運行成本低。
3. Sodium alkali is recycled, with less loss and low operation cost.
4、 鈉堿吸收劑反應活性高、吸收速度快,可采用低液氣比,從而既可降低運行費用。
4. Sodium alkali absorbent has high reaction activity and fast absorption speed, so low liquid gas ratio can be adopted, which can reduce the operation cost.
5、 脫硫渣五毒,溶解度非常小,無二次污染,可綜合利用。
5. Desulfurization residue has five toxins, very low solubility, no secondary pollution, and can be comprehensively used.
6、 結構簡單、使用方便。
6. The utility model has the advantages of simple structure and convenient use.